Setup - Indoor 360 Camera

 STEP 1: Install and open the Curv Smart app. This can be found on the app store for both IOS/Android devices and can installed using the QR code below.

 STEP 2: Lets begin by opening the WiFi settings. Make sure you are connected to your home WiFi and your router is operating at 2.4 GHZ. STEP

 3: Create an account and login when prompted. Press the 'ADD DEVICE' button to begin the setup.

 STEP 4: This device is classed as a Smart Camera, select this option to continue. 

STEP 5: Hold the reset button on the device for 10 seconds until the camera says please configure network. This will indicate the device is in pairing mode.

 STEP 6: Enter your WIFI details exactly as shown on your router. Please note this section is case sensitive. 

STEP 7: A screen will prompt you to point your Camera towards a QR Code.

 STEP 8: Point the camera at the QR code displayed on the screen. The Camera will sound once pairing has begun, press the I heard a prompt button once you hear this sound. 

STEP 9: Wait for the pairing to complete then give your device a name. Press the done button and your setup is now complete.