How to Pair the Internal siren to your Curv Home Alarm System
Step 1: Hold the reset button on the rear of the siren until you hear 3 beeps, then release the button. This will reset the internal siren.
Step 2: Hold the reset button on the rear of the siren until you hear 2 beeps, release the button after 2 beeps. The LED light on the siren should now be rapidly flashing.
Step 3: Press the SOS button on the control panel to finish the pairing.
Step 4: When you hear 1 long beep and 1 short beep, this will indicate that pairing has succeed. Congratulations!
Comments
0 commentsPlease sign in to leave a comment.