How to Adjust the sensitivity on your Curv Doorbell

How to change the sensitivity of your Curv Doorbell

Step 1: Let's begin by opening the Curv Eye application.

Step 2: Once on the main menu, click onto the live video feed.

Step 3: Allow the live view to load, then click onto the settings  button in the top right hand corner.

Step 4: Your device will ask you to input the Administrator password, this was created in the initial setup.

Step 5: You'll be taken your settings menu, navigate to the ‘Motion Detection Sensitivity’ tab.

Step 6: Using the slide bar you can adjust the sensitivity. In busy locations it would be advised to lower the sensitivity to reduce the activity of the camera. This will also maintain the battery life as the camera will not trigger as often.

Step 7: Congratulations you’ve now adjusted the sensitivity of your Curv Doorbell.