Setting up your Curv Video Doorbell for the first time
Step 1: Begin by installing the Curv Eye application, this can be done from the IOS App Store or Android Google Play Store.
Step 2: On the main menu press the 'Add Device' button.
Step 3: Remove the batteries from the green plastic case, then remove the plastic covers which are placed over the negative end of the battery. Once the covers have been removed please insert the batteries the correct way as shown in the slide show.
Step 4: On the front of the Curv Doorbell there should be a red flashing light, if the light is not displayed please hold the reset button on the back of the doorbell for 10 seconds until the light appears.
Step 5: The app will now ask you to confirm the Wi-Fi network, please press the 'Enter the Configuration Interface' button.
Step 6: You will now be re-directed to your Wi-Fi settings. Please select the 'TOSEE_' network and press connect. At the top of the screen press the pop up notification which will appear asking you to return to the application.
Step 7: Now you have paired your doorbell with your app, press the 'Next' button to continue.
Step 8: You will now need to connect the Curv Doorbell to your home Wi-Fi, to do this please enter your Home Wi-Fi login details.
Step 9: The Curv Doorbell will now ask you to create a password, please ensure this is kept safe as it will be needed to make any changes to the settings.
Step 10: Congratulations your Curv Doorbell is now setup and ready to use.