Connect Heater Via Zigbee Gateway to Curv Smart App

Tip: You must add a Zigbee Gateway before you start this process

1. Open up the CURV SMART APP
2. Select the ZIGBEE GATEWAY from the list
3. Select ADD DEVICES
4. Select ADD NEW DEVICES
5. Switch the Heater on at the socket & put the switch on the heater to POSITION 1 (On)
6. Press the WIFI button on the unit for 3 seconds until it begins FLASHING ( Pairing Mode)
7. The heater should appear on the app press FINISH
8. Now you can rename the heater to what you want by pressing the PEN SYMBOL
9. Press DONE to add to the App
10. The heater will appear on the ZIGBEE GATEWAY DEVICE LIST & on the CURV SMART APP