Connect Heater Via Wifi to Curv Smart App

1. Go to your devices SETTINGS.
2. Select PERSONAL HOTSPOT
3. Ensure your device has Personal Hotspot switched ON. 
4. Ensure your device has Personal Hotspot set to AUTOMATICALY JOIN.
5. Open the CURV SMART APP on your device
6. Select the +. 
7. Select ADD DEVICE.
8. Select HEATER.
9. Enter your INTERNET DETAILS and PASSWORD.
10.  Go to the Heater & Switch the Heater to the 1 POSITION on the switch.
11. Ensure the WIFI symbol is BLINKING (Pairing mode)ONCE EVERY 2-3 SECONDS
12. If it is Flashing twice per second press the WIFI SYMBOL FOR 5 SECONDS it will then go to BLINKING (Pairing mode)
13. Back on the App confirm indicator is SLOWLY BLINKING
14. App will begin a 2 minute pairing process.
15. Heater should appear hear you can rename the Heater for better reference.
16. If the heater does not appear check settings & try the process again.

Tip: Always do this process 1 heater at a time so that you know which specific heater you are pairing.