Setting The Time & Date on the Cylinder

To set the time and date on the cylinder follow these steps:

1. Press TIMER button on the display
2. Set the Hour with the + & - buttons on the display 
3. Press TIMER again to set the Minutes using the + & - buttons 
4. Press the TIMER button again to set the WEEK using the + & - buttons
5. Press the TIMER button again to set the DAY using the + & - buttons
6. Press the TIMER button again to set the MONTH using the + & - buttons

Note: The time and date must be set completely in one session to take effect — exiting partway through the setting process will invalidate the configured parameters. Because time accuracy directly affects sterilisation, VAC, ECO, and energy consumption statistics, it's strongly recommended to set the correct time, day of week, date, and other information immediately after installation; if the VAC function is used, this should be done in advance, as resetting the time while VAC is running will cause the unit's startup time to be inaccurate.