Setting Timed Heat Up Schedule

There are 2 ways of setting this up: 1. Via the Curv Smart App

                                                          2. Via the cylinder display.

1.Via the Curv Smart App

• Open the Curv Smart App
• Select the Cylinder
• Under SETTINGS select CURRENT MODE
• Select ECO
• Set the Workday (Mon-Fri) time intervals max 2 interval

• Set the Rest day (Sat-Sun) time intervals maximum of 2

  The start and end tomes must be different otherwise the setting is invalid i.e. 00:00 - 00:00 the schedule will not heat up.

• Press CONFIRM to store this setting

2. Via the Display

L1 & L2 refer to Work days (Mon-Fri) and L3 & L4 refer to Rest days (Sat-Sun) just like on the app.

• On the display press MODE until ECO  is displayed.
• Press SET on the display to take you to the Time Schedule.
• L1 will appear and the Start Time press the + & - to adjust the Hour press SET
• Adjust the Minutes with the + & - press SET 

• Do the Same for L2, L3, L4 press SET a final time to store the program.

  Caution: this will not re heat the cylinder outside of these time schedules