How to Set up the Curv Smart Doorbell Chime – Curv360

In this guide we will show you how to set up your Cürv Smart Doorbell Chime.

View the text version of the instructions below.

Setting up your Curv Smart Doorbell Chime

Step 1: Open the Curv Smart application.

Step 2: Select the Doorbell you want to pair the Chime to.

Step 3: The live view will then load and then navigate to the settings tab.

Step 4: Select the Bell Settings option.

Step 5: Plug your chime into the wall socket as we need to put this into pairing mode, to do this press the reset button once.

Step 6: Your chime will begin to flash, this indicates the chime is ready to pair.

Step 7: Now the chime is in pairing mode, press the bind button on your phone screen.

Step 8: The ringer has now paired, you can select a ringtone and adjust the volume.

Step 9: Press the doorbell button to activate the chime.

Step 10: Congratulations your Curv Smart Doorbell Chime is now setup and ready to use.