How to Access the SD Card within your Curv Camera – Curv360

In this guide we will show you how to access the SD card within your Cürv Video Camera.

View the text version of the instructions below.

How to Access the SD Card within your Curv Camera

Step 1: Slide off the back-mounting plate from the camera body.

Step 2: On the rear of the Curv Camera will be 4 screws in each corner. Using the screwdriver provided, remove the screws and put them safely to one side so they don't get lost.

Step 3: Once all the screws have been removed, carefully remove the back of the Curv Camera to reveal the internal electronics.

Please be mindful of the wires and follow this step with extra care.

Step 4: Connected to the motherboard you will see the SD card slot. Push the SD Card inwards to release it from the holder.

Step 5: Please ensure the rubber gasket is placed correctly back onto to the seam.

If this is not correctly aligned the device will no longer be water resistant and can cause damage to the internal electrics.

Step 6: Now you have removed the SD card you can upgrade or replace it. Follow the steps in reverse to assemble the camera back together.

Menu